A fire broke out on Saturday, February 17 at Tesla’s car plant in Fremont, California. This isn’t anything new, because we do hear about businesses that have fires from time to time.
But, what makes this fire different is that it happened in an area where the company stores some of its hazardous materials outside. And, because of this, Tesla was forced to call the local Fremont Fire Department and required a hazardous materials unit.
According to reports, Tesla has a history of fires at this facility. This includes a fire in their paint shop in April 2018 and another outdoor fire in August 2018.
Add to this, Tesla was already under investigation by Cal-OSHA cited in January and fined $29,000 for allegedly violating six different worker safety regulations in their general assembly 4 (GA4) production line.
According to the Silicon Valley Business Journal:
“Tesla allegedly didn’t obtain a building permit or inspect the tent for safety violations, train workers on how to get out of the building in an emergency, or protect themselves from heat illness. Cal-OSHA also claims the tent had exposed metal rods and rebar that workers could potentially impale themselves on, and failed to cover a hole in the floor that was 22 inches wide, 14 inches wide and 8 inches deep.”
Suffice it to say...this fire isn’t helping Tesla’s safety record with OSHA.
So, what can businesses who store hazardous materials do to avoid Tesla’s potential catastrophe with that fire. Here are some very important things you should do.
Using the right storage containers for different types of hazardous waste is the key to safety and compliance. All hazardous waste generators must insure that their containers are built to specification according to the most current codes and regulations.
Following is a list of the different types of hazardous waste storage containers according to the Environmental Protection Agency website.
Containers - portable device in which hazardous waste is stored, transported, or otherwise handled.
Tanks - stationary device of man-made materials used to store hazardous waste, either open or closed.
Drip Pads - wood drying structure used by the pressure treated wood industry to collect excess wood preservative and drippings.
Containment Buildings - completely enclosed self-supporting structures used to store or treat non-containerized hazardous waste.
Waste Piles - open, uncovered pile used for treating or storing hazardous waste.
Surface Impoundments - a natural topographical depression, man-made excavation or diked area such as a holding pond, storage pit or settling lagoon.
Proper storage and disposal requires you to understand which materials are toxic, what they do, the types of containers needed for storing the material and the type of personal protective equipment (PPE) that must be used.
You can learn more about which container is right for you waste by reading our article, How To Choose The Right Hazardous Waste Storage Container.
Identification of properties and the regulatory status of waste that you generate is vital in maintaining compliance with state and federal regulations.
Hazardous waste generators that accumulate hazardous waste on-site in containers must be aware of the Resource Conservation and Recovery Act (RCRA) regulations regarding the proper labeling, marking and placarding requirements for hazardous waste containers.
The California Department of Toxic Substances Control (DTSC) provides the following guidance for the proper labeling requirements for California hazardous waste generators as outlined in Title 22, California Code of Regulations (Cal. Code Regs.):
You can learn more in our article, How To Properly Label Hazardous Waste Containers.
According to federal and state regulations, every hazardous waste generator is required to have an emergency contingency plan. This plan outlines the company’s program to minimize hazards to human health and the environment from fires, explosions or an unplanned sudden release of a hazardous waste.
Failure to implement a plan can lead to hefty fines with the California Department of Toxic Substances Control (DTSC) and the Environmental Protection Agency (EPA)
Your Hazardous Waste Contingency Plan should include:
Designate an emergency coordinator and post contact information
Post the location of emergency equipment
Post emergency telephones
Ensure employees are familiar with emergency procedures
Create a written plan on-site and make sure the it is up-to-date and reviewed frequently
Designate an emergency coordinator(s) and post contact information
Post the location of emergency equipment
Post emergency telephones
Create an emergency evacuation plan
Ensure employees are familiar with emergency procedures
List name, address and phone number (s) (home and office) for designated emergency coordinator
Submit written plan to local authorities
You must maintain at least one copy of the contingency plan at the facility, but multiple copies is even better. In addition, copies must be submitted to local police departments, fire departments, hospitals, and state and local emergency response teams that may provide emergency services to the facility.
Even if a facility will be providing its own responders, the contingency plan should still be sent to appropriate authorities in the local community in case of an off-site release or major emergency that requires their assistance.
You can read more about how not having a hazardous waste contingency plan affected another company in our article, No Hazardous Waste Contingency Plan Leads To Big Fine For Manufacturer.
Many companies choose to outsource their emergency response as an alternative to training, equipping and maintaining an emergency response team in-house. And, some companies will have more than one company at their disposal to ensure availability when an event occurs.
Emergency response companies have a fully-staffed, fully-trained hazmat emergency response team that are available 24 hours a day, 365 days per year.
It is important to establish a relationship in advance to allow for fast response times, with experienced supervisors who coordinate with all responsible agencies (such as local fire and rescue) to limit liability and costs.
Whether you need to control a situation or stop a potentially dangerous one, having an outside HazMat emergency response team provides the following benefits:
Save Lives
Protect Property
Preserve the environment
Limit Liability
You can learn more about using a HazMat emergency response team in our article, What A HazMat Emergency Response Team Can Do For Your Business.
Tesla serves as an example of what could happen to companies that use, generate and require storage of hazardous materials. Although nothing serious happened in Tesla’s recent fire, it could be much worse for your company if you don’t have the above procedures in place.
If you need assistance with putting together your program, contact a hazardous materials company that specializes in helping companies create and maintain their program.